Set airbrushing high-performance: powerful compressor double piston and airbrush triple-step, double-action and nozzles floating.
Set airbrushing very versatile thanks to its powerful compressor that offers 35-40L/Min of air you will be able to cope with any airbrushing (automotive, t-shirts, modelling, body paint, tattoo, temporary, etc). Your airbrush with 3 steps (0,3-0,5-0,8 mm) will allow you to work from aerografías high detail to small at anchor of color, always with a rate of covering high and an easy cleaning of its shutter thanks to its system of spray nozzle floating.
The set of airbrushing Ares includes:
* Compressor Ventus Air 35
- Power: 1/4CV
- Air flow: 35-40L/min
- Air tank 3.5 L
- Auto start at 3 bar, auto stop at 4 bars
- Pressure range adjustable between 0 to 6 bars
- Includes pressure gauge, regulator and filter moisture-proof
- Noise level: 62db
- Dimensions: 35x14x36cm. Weights Net: 10,70 kg
- Output connector: 1/8
- Electric Cable: 1.9 m
* Airbrush Ventus Ares AGF
- Kit shutter + needle; 0.3 mm, 0.5 mm and 0.8 mm
- 3 Tanks of metal, interchangeable, for 2 ml, 5 ml and 13 ml.
* Hose Nylon braided 2 mtrs.
Maintenance: requires No maintenance, works without oil. It is recommended to purge the air tank (screw-less) often to prevent the water generated in its inside to oxidize the inside of the same. In the same way to purge the filter anti humidity of the output air. It is important to control the heating of the piston, not to maintain a constant work-flow to more than 20 minutes at a time.
*** NOTE: In the tab Download you'll find the manual with the detailed information about the special promotion for the Express Course of airbrushing for 3 Hours (only increases 15€ more to your set of airbrushing). ***